DESCRIPTION
LoRaWAN asset tracker was designed to adapt to most localization and activity tracking needs, for small equipment or assets in general. This mini Wi-Fi/GPS tracker allows on the one hand an outdoor geolocation (via GPS/GLONASS), but also indoor geolocation via sniffing of Wi-Fi networks.
Wi-Fi triangulation also reduces the energy consumption of this LORAWAN sensor. The definition of known hotspots also makes it possible to detect if the GPS tracker is currently in a known area.
The device is equipped with a built-in accelerometer, which allows to determine the index of motor activity of the controlled object, to detect shocks and overturns.
CONSTRUTAG has built-in data storage that can be used in the absence of LoRaWAN coverage. In this case, the device continues to work as usual, accumulating data that will be transmitted in strict sequence when the device appears in the network coverage area.
| Enclosure dimensions | 54 x 35 x 23 mm excluding fasteners |
| Operational temperature range | -40…+85 °С |
| Operational humidity range | 0-100% |
| Ingress protection rating | IP-65 |
| Installation | Using screws, screeds, double-sided tape |
| Weight | < 30g |
| Operating range of supply voltages | 3.0-3.6В |
| Battery | Replaceable Li-SOCL2 battery type ER14335 |
| Battery life | up to three years depending on settings |
| Geolocation method | Wi-Fi/GNSS |
| Geolocation period | customizable |
| Wi-Fi frequency range | 2401-2495 MHz |
| Wifi sensitivity | –97 dBm |
| Wi-Fi transmit power | 19dBm |
| Supported global navigation satellite systems | GLONASS/GPS/QZSS |
| Number of channels | 99 |
| Frequency range | 1575,42-1615,5 MHz |
| Sensitivity | -165dBm |
| Cold start time | 60s |
| Hot start time | 6s |
| Embedded RTC sync with GNSS | yes |
| Communication standard | LoRaWAN 1.0.3 class A |
| Radio frequency range | 864-1000 MHz |
| Maximum transmit power | 20 dBm |
| Sensitivity | -137dBm |
| Network activation method | ABP/OTAA |
| Supported LoRaWAN regions | RU864/AS923/AU915/EU868/KR920/IN865/US915 |
| Adaptive data rate (ADR) | yes |
| Data transfer period | from 1 minute to 1 day |
| Embedded RTC sync with LoRaWAN network | yes, with adjustable interval |
| LoRaWAN packet confirmation | yes, configurable |
| LoRaWAN data rate | from DR0 to DR5 |
| Motion activity calculation method | using the built-in accelerometer |
| Motion activity averaging interval | from 15 to 1440 minutes |
| Shock detection function | Yes |
| Sleep mode if not active | Yes, with adjustable interval |
| Configuration interface | Bluetooth low energy |
| Frequency range | 2402-2480 MHz |
| BLE beacon transmission period | 20 seconds |
Asset tracker
CONSTRUTAG
Receiving coordinates or mac addresses of Wi-Fi access points, as well as data from the periphery and data transmission via LoRa
BASE STATION
Receiving data transmission from device to server
LoRaWAN NETWORK SERVER
The server is responsible for the operation of the lorafan network
INTERNET
Data transport from server to user and back
USER APPLICATIONS
Displaying data on your user devices
Sealed, dust and moisture resistant housing
The body of the monitoring tracker is made of durable sealed plastic, and its design provides protection against dust and short-term immersion in liquid.
You can install the tracker at any place available on the site.
In case of storage of goods in an enclosed area, the CONSTRUTAG tracker determines the location by GLONASS
Long battery life
Due to the power supply of the GPS tracker from sources of the ER type (has a capacity of 1650 mAh) and various operating modes, the device works even on long journeys.
Preset options for device operation simplify its configuration:
1. “HOME” mode is active when the device is in range of one of the previously known Wi-Fi access points.
2. “TRACKING” mode is automatically activated when the device leaves the range of known access points.
3. “SEARCH” mode is activated by the downlink command.
Asset movement monitoring
By placing a tracker on your movable property, you can track the location of your vans, trucks and other rolling stock.
The device allows you to timely detect emergency situations, register collisions, strikes or burglary attempts using a Hall sensor and an accelerometer.
Due to the fact that the device is autonomous and does not require recharging, you can install it in the cavity of a car or equipment.
MAIN FUNCTIONS
Positioning using a Wi-Fi sniffer
Positioning using GPS / GLONASS
Determination of motion activity and strokes
Burglary / Tampering detection with Hall sensor
APP CONSTRUTAG
A convenient application for those who often work outside the office, as well as for wireless device settings. After installing the special ConstruTag application, you get access to the device remotely and can use the data from the smartphone screen.
You can install the application through the Google Play Market
contact us
Belgium – Brussels
Parvis Sainte Gudule 5 1000 Brussels, Belgium
+32 2 319 5426
Russia – Novosibirsk
+7 (383) 382-81-81
Leave your contact details
DESCRIPTION
LoRaWAN asset tracker was designed to adapt to most localization and activity tracking needs, for small equipment or assets in general. This mini Wi-Fi/GPS tracker allows on the one hand an outdoor geolocation (via GPS/GLONASS), but also indoor geolocation via sniffing of Wi-Fi networks.
Wi-Fi triangulation also reduces the energy consumption of this LORAWAN sensor. The definition of known hotspots also makes it possible to detect if the GPS tracker is currently in a known area.
The device is equipped with a built-in accelerometer, which allows to determine the index of motor activity of the controlled object, to detect shocks and overturns.
CONSTRUTAG has built-in data storage that can be used in the absence of LoRaWAN coverage. In this case, the device continues to work as usual, accumulating data that will be transmitted in strict sequence when the device appears in the network coverage area.
| Enclosure dimensions | 54 x 35 x 23 mm excluding fasteners |
| Operational temperature range | -40…+85 °С |
| Operational humidity range | 0-100% |
| Ingress protection rating | IP-65 |
| Installation | Using screws, screeds, double-sided tape |
| Weight | < 30g |
| Operating range of supply voltages | 3.0-3.6В |
| Battery | Replaceable Li-SOCL2 battery type ER14335 |
| Battery life | up to three years depending on settings |
| Geolocation method | Wi-Fi/GNSS |
| Geolocation period | customizable |
| Wi-Fi frequency range | 2401-2495 MHz |
| Wifi sensitivity | –97 dBm |
| Wi-Fi transmit power | 19dBm |
| Supported global navigation satellite systems | GLONASS/GPS/QZSS |
| Number of channels | 99 |
| Frequency range | 1575,42-1615,5 MHz |
| Sensitivity | -165dBm |
| Cold start time | 60s |
| Hot start time | 6s |
| Embedded RTC sync with GNSS | yes |
| Communication standard | LoRaWAN 1.0.3 class A |
| Radio frequency range | 864-1000 MHz |
| Maximum transmit power | 20 dBm |
| Sensitivity | -137dBm |
| Network activation method | ABP/OTAA |
| Supported LoRaWAN regions | RU864/AS923/AU915/EU868/KR920/IN865/US915 |
| Adaptive data rate (ADR) | yes |
| Data transfer period | from 1 minute to 1 day |
| Embedded RTC sync with LoRaWAN network | yes, with adjustable interval |
| LoRaWAN packet confirmation | yes, configurable |
| LoRaWAN data rate | from DR0 to DR5 |
| Motion activity calculation method | using the built-in accelerometer |
| Motion activity averaging interval | from 15 to 1440 minutes |
| Shock detection function | Yes |
| Sleep mode if not active | Yes, with adjustable interval |
| Configuration interface | Bluetooth low energy |
| Frequency range | 2402-2480 MHz |
| BLE beacon transmission period | 20 seconds |
Sealed, dust and moisture resistant housing
The body of the monitoring tracker is made of durable sealed plastic, and its design provides protection against dust and short-term immersion in liquid.
You can install the tracker at any place available on the site.
In case of storage of goods in an enclosed area, the CONSTRUTAG tracker determines the location by GLONASS
Long battery life
Due to the power supply of the GPS tracker from sources of the ER type (has a capacity of 1650 mAh) and various operating modes, the device works even on long journeys.
Preset options for device operation simplify its configuration:
1. “HOME” mode is active when the device is in range of one of the previously known Wi-Fi access points.
2. “TRACKING” mode is automatically activated when the device leaves the range of known access points.
3. “SEARCH” mode is activated by the downlink command.
Asset movement monitoring
By placing a tracker on your movable property, you can track the location of your vans, trucks and other rolling stock.
The device allows you to timely detect emergency situations, register collisions, strikes or burglary attempts using a Hall sensor and an accelerometer.
Due to the fact that the device is autonomous and does not require recharging, you can install it in the cavity of a car or equipment.
MAIN FUNCTIONS
Positioning using a Wi-Fi sniffer
Positioning using GPS / GLONASS
Determination of motion activity and strokes
Burglary / Tampering detection with Hall sensor
APP CONSTRUTAG
A convenient application for those who often work outside the office, as well as for wireless device settings. After installing the special ConstruTag application, you get access to the device remotely and can use the data from the smartphone screen.
You can install the application through the Google Play Market
